Click to enlargeAll Outlines, Contours and Shadows are two separate decals. The Outline, Contour or Shadow is applied to the surface first and then the top layer is added to give one of the looks below.
All decals are made so they show up normal on the OUTSIDE of the glass or on a painted surface. The reverse option can be used so the decal appears correctly on the outside if placed on the inside of the glass. Note that the word "REVERSE" is backwards. This allows it to appear correct on the outside of the glass even though it would be installed on the inside.
Click to enlarge
The reverse option may also be used so the same design on the opposite side of of a vehicle (left or right) will be facing forward. Note that in the image the normal decal points right. Reversing the decal will allow the decal to point left for the other side. This will NOT work for decals that have numbers or lettering since the lettering will appear reversed like in the image above.
Click to enlarge
Shadows consist of 2 identical but separate decals that you off-set during installation. In the image below the black decals were installed first then the red was installed over the top. As you can see you may off-set the top decal in any direction allowing the shadow to appear above, below, left, right or any combination of directions.
Click to enlarge
Click to enlarge
The Compound 2 Colors option is used for two different colors in one design. As shown in the images above the design is mixed with black and red. This will consist of two separate color decals that you will line up during installation. When choosing this option state specifically in the comments box what parts of each decal you want for each color.
| More Compound 2 Color Examples |
    
|
Outlines/Inline VS. Contours VS. Fill In (adds 90% to the price)In the images below the first decal has no extras added to it. The design with RED is an Outline/Inline while the BLUE is a Contour. Outlines/Inlines follow around all cuts (inside and outside of the design). While contours only follow around the outside of the design. A FILL IN will be the same as a Contour withOUT the background color going past the edge of the design. For most designs and Outline/Inline works best for lettering/numbers. While a Contour or Fill works best for art designs like cartoons or animals.
|
||||||
|
Here is a Punisher decal with all the 2 Color options |
|
|
|
Note that the black is the First/Main color choice when ordering. The red would the second color choice when ordering in this combination. |
| More Outline/Inline Examples |
  
|
| More Contour Examples |
    
|
|
Some FILL Examples |
   |
