Printed Decal Material
When designing a printed decal you have a couple of
options on what type of vinyl you would like the ink to be printed on.
Below is an explanation of the choices you have:
 |
Standard GLOSSY Vinyl (4
Year)- This is the proper
choice for most decals. This will give the decal a photo glossy finish
and is conformable to most simple curves. If unsure what type of vinyl
to use just choose this one as it is the most popular. Matte
shown on the right for reference. |
 |
Standard MATTE Vinyl (4 Year)- This is used
if you want the finish of the print to be "matte" or "chalkboard" like.
This will leave the surface a NON-glossy finish and is conformable to most
simple curves. Glossy shown on the left for reference. |
 |
Premium WRAP Vinyl (7 Year)- This is a glossy
white vinyl with special channels in the adhesive that allows air to more
easily escape than regular vinyl (see image). This makes it easier to
work out air bubbles and wrinkles. It can be stretched quite easily
especially with a heat gun. This is the material the
vehicle wraps are typically made from. Works best on complex curves such
as automotive panels with with extreme curves, motorcycle gas tanks, helmets,
etc. There is a 150% premium added to the price of the decal for this
vinyl since lamination must be used in conjunction with it. The glossy finish can be made matte by choosing a matte laminate. |
 |
Premium REFLECTIVE Vinyl (7 Year)- This is a
glossy vinyl that makes the decal reflect at night when indirect light shines
on it. Whites will not appear pure white as this vinyl has a slight
pearl-silver tint to it. It will make ALL colors appear to be
printed with metallic ink. This vinyl is approximately 3 times thicker (6
mils) than the other vinyl offered so it does NOT conform well to complex
curves. This should be used mainly on flat surfaces or those with very
little curvature. There is a 90% premium added to the price of the decal
for this vinyl.
Flames shown on left: The top picture shows the image in low light while
bottom picture shows the decals with a flash. |
 |
Standard CLEAR Vinyl (4
Year)-
READ CAREFULLY BEFORE CHOOSING THIS OPTION. This
vinyl is totally clear. Note that all ink for printing is designed to be
used on a white vinyl. So choosing this option will make the colors of
the decal not appear as shown. The surface color you are applying the
decal to will have a great effect on how colors will look as the ink itself is not totally opaque.
It will make the design appear similar to that of a "ghost flame". This
can caused standard colors to appear washed out unless applying it to a white
background (in which a white vinyl should be chosen). See
this page for more information. This clear vinyl
is mainly used in conjunction with solid, dark inks such as black. Please
email with any questions you may have before you
choose this option. This vinyl leaves a glossy finish and conforms well
to most simple curves. |
 |
Perforated Window Film (1-2 Year) - Works great for
solid decals that go on a window that you need to see out of. This decal
goes on the OUTSIDE of the glass. Adhesive side is black for better vision.
Lamination can be added for extra durability of several more years.
Decal design MUST be a solid shape design withOUT any type cut-outs so most
of the designs on the site will have to be modified in order to use this
material. So be sure to check your email if you choose this type of
material when ordering because a choice may need to be made on how you wan
the decal to be designed.
Top Picture - Shows back side (black with adhesive) and front side.
Middle Picture - Shows how a print looks up close.
Bottom Picture - Shows how a whole back window is covered. |
Lamination is available at an extra cost
for PRINTED DECALS. Glossy or
Matte (dull) finish is available.
 | While lamination is not required for most decals it should be
considered for extreme conditions. |
| All printed decals are printed on premium 2-7 years outdoor life
vinyl. |
| The ink is rated for approximately 3 years of outdoor use withOUT
lamination. |
| Below are some examples of when you may wish to opt for lamination:
~If the decal may have Fuel or Harsh Chemicals spilled on it (like on a
motorcycle gas tank).
~If the decal will have a lot of friction due to something/someone rubbing
against it (like a decal for a cell phone).
~If the decal will be in extremely dirty conditions (like on a dirt bike
or ATV)
~While the decal will be glossy without lamination, adding it will make it
even more glossy (think clear coat on paint)
~Or if you just want to make sure the decal will look like new for the
longest period of time. |
| Please Read BEFORE you
choose lamination as an option. It should be noted that there are
restrictions to what designs can have lamination. Several designs
on the site will have too sharp of corners to be laminated and cut as
they are shown. Rounded and square corners are fine but designs
with sharp tips just can't be cut properly with lamination. This
would include designs that may be something like a flame tip or a sharp
Z shaped corner. But these can still have lamination but a
contour
shape will need to be included in whatever color you like. The
contour
will help smooth out corners and fill in "open" areas within the design
with your color choice. Not all designs will require the contour
but if you do order you should stated in the comments box your color
choice for a contour if it does need to be added. |
|
Available Now Upon Special Request:
Static Cling Vinyl,
Perforated Window Film, Bumper Sticker, Posters Paper and Canvas. You may now enjoy any design shown on the site
as a poster or printed on canvas. It can even be an image you provide.
You can pick any size you want along with the background and design color.
Possibilities are endless. Email for questions.
 |
Static Cling (1-2 Year)- Looks like regular gloss vinyl but has no
adhesive. Sticks well to windows, painted surfaces, fiberglass, or any
smooth/clean surface. Critical that the surface is clean before
installation. NO ADHESIVE; relies on static to hold the decal in
place. |
|
|
Bumper Sticker (4 Year) - This looks like regular gloss vinyl
but is slightly thicker so you can just peel and stick. You don't need
to have application tape over the decals like you traditionally would.
The design has to be a pretty basic shape (like rectangular or circular) with no holes in it for this type
of easy installation. Since the vinyl is thicker than most vinyl it
does NOT conform well to surfaces that have a lot of curvature. |
| X |
Wall Vinyl - This material is used for large wall
graphics similar to those made by FATheadŽ. Material is THICK (6 Mils)
and can be removed and reapplied since it has a very low adhesive.
Decal will stick to any smooth clean surface such as painted wall, glass or
finished wood surfaces such as doors. It is NOT recommended for
textured surfaces, unpainted drywall, outdoor walls, vehicles or bricks.
If you have recently painted your walls do NOT install the decal for at
least 30 days to allow the paint to fully cure to prevent damage. All
decals printed on this material will have a white border around the image
that is approximately 0.25 inch thick; this prevents the edge from curling. |
 |
Poster Paper - Just as you would expect. Paper is
Semi-Gloss and can be made in any size. Any design shown on the site
can be printed up in any color or pattern to make your own CUSTOM POSTER.
You can even have an image of your own printed. NO ADHESIVE. |
 |
Matte Canvas - Have an image printed up on Canvas to be
custom art. Any design shown on the site can be printed up in any
color or pattern. You can even have any image of your own printed. NO
ADHESIVE. |
| X |
Gloss Canvas - COMING SOON |
|
