Loading...

Choosing a color for your decal
Most decals can be made in any color you want.

Decal Removal Instructions

Decal Removal

bullet To remove an existing decal it is easiest removed with heat
bullet This can be done with a hair dryer or heat gun.  Be careful not to overheat the surface....you just want to get the decal warm.
bullet If the decal is on glass no heat is needed.  Just use a razor blade to scrape of the decal.  Hold the blade as parallel to the glass as possible.
bullet After the decal is removed there will probably be some glue residue left.  This is best removed with a mild adhesive remover such as Goo Gone or Goof Off.  I recommend using the 3M spray adhesive remover found at automotive stores such as Car Quest.  Be sure to test the chemical on a small part of the area to make sure it will not stain or discolor the surface.


Most decals can be made in any color listed above or on the color chart.

Note: FastDecals.com does not (necessarily) have an affiliation or agreement with any displayed companies, nor the authority to reproduce their logos (with some exceptions).  Any company or product logos displayed on this site are the property and/or registered trademarks of their respective owners, and are provided as a convenience only for their lawful use by owners, dealers, agents, resellers, and sponsorship recipients. It is the expressed intent of FastDecals.com that lawful reproduction of the aforementioned designs shall be the sole responsibility of the purchaser.  Purchase of any product from FastDecals.com is not authorization for the use of any specific logo or trademark.  By clicking the "Add to Cart" button you convey to FastDecals.com you have authority (if required) to use the above artwork.  Please see this page for more details on this FREE ADVERTISING PROGRAM.  If your company logo is listed on this site and you would like it to be removed, please send me an email with details for a prompt resolution.